Tools Required
J 39400-A Halogen Leak Detector
- Recover the refrigerant. Refer to
Refrigerant Recovery and Recharging .
- Remove the evaporator outlet hose nut from the evaporator outlet hose.
- Remove the evaporator outlet hose from the compressor hose.
- Remove the evaporator outlet hose and liquid line retainer plate nut from the thermal expansion valve (TXV).
- Remove the evaporator outlet hose and liquid line from the TXV.
- Remove evaporator outlet hose from the vehicle.
- Remove and discard the sealing washers from the evaporator outlet hose and the compressor hose. Refer to
Sealing Washer Replacement .
- Install protective caps to the TXV, the liquid line, and the compressor hose to prevent contamination and desiccant saturation.
Installation Procedure
- Remove the protective caps from the TXV, the liquid line, and the compressor hose.
- Install new sealing washers to the evaporator outlet hose, liquid line, and the compressor hose. Refer to
Sealing Washer Replacement .
- Install the evaporator outlet hose and the liquid line to the TXV.
Notice: Refer to Fastener Notice in the Preface section.
- Install the evaporator outlet hose and the liquid line nut to the TXV.
Tighten
Tighten the nut to 20 N·m (15 lb ft).
- Install the evaporator outlet hose to the compressor hose.
- Install the evaporator outlet hose nut to the evaporator outlet hose.
Tighten
Tighten the nut to 20 N·m (15 lb ft).
- Recharge the A/C system. Refer to
Refrigerant Recovery and Recharging .
- Test the affected A/C joints for leaks using
J 39400-A .