Removal Procedure
- Remove the instrument panel (I/P) upper trim panel. Refer to
Instrument Panel Upper Trim Panel Replacement
.
- Remove the LH defogger duct screws from the I/P upper trim panel.
- Remove the LH defogger duct from the I/P upper trim panel.
Installation Procedure
- Inspect the seals, and replace if damaged, using Kent Industries adhesive backed foam tape P/N 46485 or equivalent.
- Install the LH defogger duct to the I/P upper trim panel.
Notice: Refer to Fastener Notice in the Preface section.
- Install the LH defogger duct screws to the I/P upper trim panel.
Tighten
Tighten the screws to 1 N·m (9 lb in).
- Install the instrument panel upper trim panel. Refer to
Instrument Panel Upper Trim Panel Replacement
.