For 1990-2009 cars only
Removal Procedure
- Remove the engine splash shield.
- Remove the right side engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .
- Completely remove the lower engine mount bracket bolt.
- Rotate the drive belt tensioner clockwise to release the drive belt tension.
- Slide the drive belt off of the generator pulley (1).
- Slowly release the drive belt tensioner.
- Remove the drive belt from the accessory drive pulleys.
Installation Procedure
- Install the drive belt to the crankshaft pulley, the tensioner and the idler pulley.
- Rotate the drive belt tensioner clockwise.
- Install the drive belt to the generator (1).
- Slowly release the drive belt tensioner.
- Raise the vehicle.
- Partially thread the lower right side engine mount bracket bolt in place.
- Install the right side engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .
- Install the engine splash shield.
Important: Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
