Removal Procedure
- Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection.
- Loosen the positive battery cable terminal nut.
- Remove the positive battery cable lead (2) from the battery.
Warning: Do not tip the battery over a 45 degree angle or acid could spill causing serious personal injury.
- Remove the battery hold down bolt (1) and hold down (2).
- Remove the battery.
Installation Procedure
Warning: Do not tip the battery over a 45 degree angle or acid could spill causing serious personal injury.
- Install the battery to the battery box.
Caution: Refer to Fastener Caution in the Preface section.
- Install the battery hold down and bolt. Tighten the bolt to
15 N·m (11 lb ft).
- Install the positive battery cable lead (2) to the battery.
- Tighten the positive battery cable terminal nut and tighten to
17 N·m (13 lb ft).
- Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection.