GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1834957  Size: SH
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.
  2. Disconnect the engine wiring harness electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.

  3. Object Number: 1834958  Size: SH
  4. Remove the MAF/IAT sensor screws.
  5. Remove the MAF/IAT sensor from the air cleaner assembly.
  6. Remove the MAF/IAT sensor seal.

Installation Procedure


    Object Number: 1834958  Size: SH
  1. Install the MAF/IAT sensor seal to the MAF/IAT sensor.
  2. Install the MAF/IAT sensor to the air cleaner assembly.
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the MAF/IAT sensor screws.
  5. Tighten
    Tighten the screws to 4 N·m (35 lb in).


    Object Number: 1834957  Size: SH
  6. Connect the engine wiring harness electrical connector to the MAF/IAT sensor.
  7. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.