---------------------------------------------------------------------- SERVICE MANUAL UPDATE ----------------------------------------------------------------------
THIS BULLETIN CONTAINS REVISIONS TO SECTION 3D. THREE NEW TORQUE VALUES HAVE BEEN RELEASED FOR THE VEHICLES STATED ABOVE WHICH REVISES THE TORQUE ON THE BOLT TO THE REAR CONTROL ARM.
FOR THE 1990 VEHICLES, THE NEW TORQUE VALUE CHANGED TO 165 N.M (122 LB.FT.).
FOR MODEL YEARS 1991 THROUGH 1994, THE NEW TORQUE VALUE IS 270 N.M (199 LB.FT.).
FOR 1995 THE NEW TORQUE VALUE IS 235 N.M (173 LB.FT.). PLEASE UPDATE YOUR SERVICE MANUAL.
FIGURES: 0
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1994 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.