Oil Cooler Hose/Pipe Replacement Inlet Line

1. Drain the cooling system. Refer to Cooling and Radiator.
2. Raise and suitably support the vehicle.
3. Place the drain pan under the engine in order to catch any fluids that may drain.
4. Remove the oil filter.



5. Disconnect the inlet hose from the oil cooler.
6. Disconnect the inlet hose from the block fitting.
7. Remove the inlet hose.

1. Install the inlet hose.
2. Connect the inlet hose to the block fitting.
3. Connect the inlet hose to the oil cooler.
4. Install the oil filter. Lubricate the seal with engine oil. Refer to Maintenance and Lubrication.
5. Lower the vehicle.
6. Fill the cooling system with coolant. Refer to Cooling and Radiator.
7. Add engine oil as necessary. Refer to Maintenance and Lubrication.
8. Inspect for leaks if necessary.

Oil Cooler Hose/Pipe Replacement Outlet Line

1. Drain the cooling system. Refer to Cooling and Radiator.
2. Raise and suitably support the vehicle.



3. Disconnect the outlet hose from the oil cooler.
4. Disconnect the outlet hose from the thermostat bypass pipe.
5. Remove the outlet hose.

1. Install the outlet hose.
2. Connect the outlet hose to the thermostat bypass pipe.
3. Connect the outlet hose to the oil cooler.
4. Lower the vehicle.
5. Fill the cooling system with coolant. Refer to Cooling and Radiator.
6. Add engine oil as necessary. Refer to Maintenance and Lubrication.