Disassembly Procedure
- Remove the upper and lower shrouds. Refer to
Steering Column Trim Covers - Disassemble - Off Vehicle
.
- Pop the wire
harness assembly (4) out of the wire harness strap (5).
- Remove the wire harness straps (3) from the wire harness
assembly (4).
- Remove 1 wire harness strap (2) from the upper tilt
head assembly (1).
- Slide the 2 connectors
of the turn signal and multifunction switch assembly (2) off of the
bulk head connector (1).
- Remove the the 2 pan
head tapping screws.
- Remove the turn signal
and multifunction switch assembly.