For 1990-2009 cars only
Circuit Description
The rear side door actuator control module is capable of performing diagnostics. When the Diagnostic Mode 1 is active, the rear side door actuator control module sounds DTCs through the PSD alarm. The rear side door actuator control module will not enter the Diagnostic Mode 1 when the any of the following conditions exist:
| • | The PSD alarm is faulty. |
| • | No power or ground to the rear side door actuator control module is present. |
Diagnostic Aids
| • | An intermittent failure may be difficult to detect and to accurately diagnose. Faulty electrical connections or wiring causes most intermittent problems. When an intermittent condition is suspected, inspect the suspected circuits for the following conditions: |
| - | Poor mating of connector halves |
| - | Backed out terminals |
| - | Improperly formed or damaged terminals |
| - | Wire chafing |
| - | Poor wire-to-terminal connections |
| - | Dirty or corroded terminals |
| - | Damaged connector bodies |
| - | A broken wire inside the insulation |
