Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Body Rear End Schematics | |||
1 | Did you review the Rear Hatch/Gate Description and Operation? | Go to Step 2 | |
2 | Actuate the hatch switch located on the IP. Did the hatch glass release? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Did the test lamp illuminate? | Go to Step 4 | Go to Step 5 |
4 | Test the ground circuit of the glass hatch actuator for continuity. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 17 | Go to Step 9 |
5 |
Did the test lamp illuminate? | Go to Step 12 | Go to Step 6 |
6 | Test for continuity in the glass hatch acuator switch circuit between the multifunction alarm module and ground. Did you measure continuity when the glass hatch switch is actuated? | Go to Step 11 | Go to Step 7 |
7 | Test the glass hatch actuator switch for continuity when the switch is pressed. Does the switch have continuity when the switch is pressed? | Go to Step 8 | Go to Step 10 |
8 | Test the ground side of the glass hatch actuator switch for continuity. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 17 | Go to Step 13 |
9 | Inspect for poor connections at the harness connector of the glass hatch actuator and courtesy switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 17 | Go to Step 14 |
10 | Inspect for poor connections at the glass hatch actuator switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 17 | Go to Step 15 |
11 | Inspect for poor connections at the multifunctional alarm module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 17 | Go to Step 16 |
12 | Repair the open glass hatch actuator feed circuit between the glass hatch actuator and the multifunction alarm module. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 17 | -- |
13 | Repair the open glass hatch actuator switch circuit between the glass hatch actuator switch and the multifunction alarm module. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 17 | -- |
14 | Replace the glass hatch actuator and courtesy switch. Refer to Liftgate Window Latch Replacement . Did you complete the replacement? | Go to Step 17 | -- |
15 | Replace the glass hatch actuator switch. Did you complete the replacement? | Go to Step 17 | -- |
16 | Replace the multifunction alarm module. Refer to Multifunction Alarm Module Replacement in Instrument Panel, Gages, and Console. Did you complete the replacement? | Go to Step 17 | -- |
17 | Operate the system in order to verify the repair Did you correct the condition? | System OK | Go to Step 3 |
