Conditions for Running the DTC
DTC C0000 can be set anytime.
Conditions for Setting the DTC
The incorrect EBCM is installed.
Action Taken When the DTC Sets
| • | The ABS is disabled. |
| • | The ABS warning indicator turns ON. |
Conditions for Clearing the DTC
The condition responsible for setting the DTC no longer exists.
Diagnostic Aids
The following are possible causes of the malfunction:
An incorrect EBCM installed
Test Description
The number below refers to the step number on the diagnostic table.
Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Antilock Brake System Schematics Connector End View Reference: Antilock Brake System Connector End Views | |||
1 | Did you perform A Diagnostic System Check - ABS? | Go to Step 2 | |
Verify the correct EBCM is installed. Is the correct EBCM is installed? | Go to Step 4 | Go to Step 3 | |
3 | Replace the brake pressure modulator valve (BPMV). Refer to Brake Pressure Modulator Valve Assembly Replacement . Did you complete the replacement? | Go to Step 4 | -- |
4 |
Does the DTC reset? | Go to Step 2 | System OK |
