GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Vibe - AWD 🢒 Accessories 🢒 Power Outlets 🢒 Accessory AC and DC Power Control Module Replacement

Removal Procedure

    Object Number: 852193 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Move the driver seat to the full rearward position.
  3. Remove the 2 bolts (1).
  4. Fold the floor carpet to the inside.
  5. Disconnect the electrical connector (2).
  6. Remove the accessory AC/DC power control module (3) from the vehicle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 852193 Size: SH
  1. Install the accessory AC/DC power control module (3) to the vehicle. Secure the module (3) with the 2 bolts (1).

    2. Tighten
    Tighten the power control module bolts to 7.0 N·m (62 lb in).

  2. Fold the floor carpet to the inside.
  3. Connect the electrical connector (2).
  4. Move the driver seat to it's original position.
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .