Tools Required

1. Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement in Wipers/Washer Systems.
2. Raise the hood.
3. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.

Caution: Refer to Battery Disconnect Caution in the Preface section.

4. Disconnect the negative battery cable.
5. Install the J 28467-VIBE onto the strut attaching studs.
6. Install the J 28467-5A Strut Tower Support Assemblies over the J 28467-33A Thread Support Nuts.
7. Install the J 28467-53 T-bolts with 5/16 inch washers through the J 28467-5A into the J 28467-33A and hand tighten.
8. Install the two J 28467-1A Cross Bracket Assemblies over the J 28467-3 Strut Tower Tube.
9. Install the J 28467-3 into the J 28467-5A.
10. Install the J 28467-10 1/2 inch x 2.5 inch quick release pin through the J 28467-5A and the J 28467-3 on one side only.
11. Hand tighten the passenger side J 28467-1A wing nuts.
12. Hand tighten the lift hook wing nut securely to remove all slack from the engine support fixture assembly.