GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Vibe - AWD 🢒 Engine 🢒 Engine Electrical 🢒 Clutch Pedal Engine Start Switch Replacement

Removal Procedure
  1. Disconnect the clutch start switch electrical connector.

    2. Object Number: 886536 Size: SH
  2. Remove the clutch start switch retaining nut, then the start switch.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.

  1. Install the clutch start switch and retaining nut.

    2. Tighten
    Tighten the retaining nut to 16 N·m (12 lb ft).

  2. Connect the clutch start switch electrical connector.
  3. Check the clutch start switch for proper operation.