The interior lighting system includes the following components:

Voltage is supplied to the I/P lamp dimmer and the illumination lamps when the light switch is in the PARK or HEAD position. The solid state dimmer controls the amount of ground provided to the lamps. The solid state dimmer is grounded to G200 through the Left instrument panel junction block. All of the interior displays are grounded to G200. The intensity of the instrument panel and instrument cluster assembly lamps is controlled by the I/P lamp dimmer located on the left side of the instrument panel. The parking lamps or headlamps must be activated for the instrument panel and instrument cluster assembly lamps to be illuminated. When the parking lamps or headlamps are activated, rotating the I/P lamp dimmer counterclockwise will decrease the instrument cluster assembly, rear window defogger switch, heater control assembly, ashtray and cigar lighter lamps illumination. Illumination of the radio display will revert from 100 percent to the setting of the IP lamp dimmer.

Refer to Instrument Panel Lamp Dimmer Switch Replacement for I/P lamp dimmer removal and installation procedures.

The cigar lighter illumination lamp lights whenever the parking lamps or headlamps are activated. The cigar lighter illumination lamp bulb socket is attached to the cigar lighter. Refer to Cigarette Lighter Housing Replacement - Floor Console for cigar lighter removal and installation procedures.

The dome lamp is located in the center of the headliner. The dome lamp consists of a clear lens, the dome lamp bulb and a three position slide switch. The slide switch has the following three detent positions:

Power comes from the dome fuse, through the Left Instrument Panel Junction Block, and finally to the dome lamp. When the switch is in the OFF position, the dome lamp will not light. When the dome lamp switch is in the DOOR position, the lamp will light when any door is open. The lamp will remain on until all of the doors are closed. When the dome lamp switch is placed in the ON position, it provides a path to ground to the dome lamp and the lamp will illuminate.

Keyless Entry Interior Illumination

Power comes from the dome fuse, through the Left Instrument Panel Junction Block and finally to the dome lamp. When the transmitter activates the keyless entry system it causes the multifunction alarm module to provide ground to the dome lamp, and the lamp will illuminate.

On vehicles equipped with a power sunroof, a map lamp is incorporated into the power sunroof switch. The map lamp consists of the following components:

Power comes from the dome fuse, through the left instrument panel junction block and then finally to the courtesy/reading lamp. When the light switch is depressed to the ON position, it provides power to the courtesy/reading lamp. Current flows through the lamp and then continues to G200 and G201. Pushing the switch a second time turns the map lamp off.

Power comes from the dome fuse, through the left instrument panel junction block and finally to the rear dome lamp. When the rear tailgate is opened the rear compartment lamp switch closes providing a path to ground. With ground and power supplied the lamp will illuminate.