GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Vibe - AWD 🢒 Transmission/Transaxle 🢒 Automatic Transmission - MU4 🢒 Manual Selector Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.

  1. Disconnect the negative battery cable. Refer to Battery Replacement in Engine Electrical.
  2. Remove the center instrument trim panel. Refer to Instrument Panel Center Trim Panel Replacement in Instrument Panel, Gages and Console.
  3. Remove the instrument compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gages and Console.
  4. Remove the front floor console. Refer to Front Floor Console Trim Plate Replacement in Instrument Panel, Gages and Console.

    5. Object Number: 859215 Size: SH
  5. Push in the retaining clip, then disconnect the cable from the shifter assembly.

    6. Object Number: 859218 Size: SH
  6. Using a screwdriver, disconnect the park lock cable from the bracket.

    7. Object Number: 859221 Size: SH
  7. Disconnect the shift select cable from the manual selector lever.

    8. Object Number: 859224 Size: SH
  8. Using a screwdriver, disconnect the shift select cable from the shift lever plate.

    9. Object Number: 859230 Size: SH
  9. Disconnect the electrical connectors, then the wire harness clip.

    10. Object Number: 859233 Size: SH
  10. Remove the 4 nuts, then the manual selector from the vehicle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 859233 Size: SH
  1. Install the manual selector into the vehicle. Secure the manual selector with 4 nuts.

    2. Tighten
    Tighten the manual selector bolts to 16 N·m (12 lb ft).


    Object Number: 859230 Size: SH
  2. Connect the manual selector electrical connectors.

    3. Object Number: 859224 Size: SH
  3. Install the shift select cable into the shift lever plate.

    4. Object Number: 859221 Size: SH
  4. Connect the shift select cable to the manual selector lever.

    5. Object Number: 859218 Size: SH
  5. Install the park lock cable to the shift lever plate.

    6. Object Number: 859215 Size: SH
  6. Connect the park lock cable to the manual selector lever.
  7. Install the center instrument trim panel. Refer to Instrument Panel Center Trim Panel Replacement in Instrument Panel, Gages and Console.
  8. Install the instrument compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gages and Console.
  9. Install the front floor console. Refer to Front Floor Console Trim Plate Replacement in Instrument Panel, Gages and Console.
  10. Connect the negative battery cable.