GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Vibe - AWD 🢒 Preface 🢒 Cautions and Notices 🢒 Headlining Trim Panel Replacement

Removal Procedure

    Object Number: 432007 Size: SH
  1. Disable the air bag system. Refer to SIR Disabling and Enabling in SIR.
  2. Remove the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement .
  3. Lower the door opening frame garnish moldings (1, 2) on the front and rear door pinch weld flanges.
  4. Remove the assist handles. Refer to Assist Handle Replacement .

    5. Object Number: 241992 Size: SH
  5. Gently pry and remove the windshield side garnish moldings (1).
  6. Remove the sunshades and retainers. Refer to Sunshade Replacement .
  7. Remove the courtesy and reading lamp/sunroof switch assembly, if equipped. Refer to Sunroof Switch Replacement in Roof.
  8. Remove the dome lamp. Refer to Dome Lamp Replacement in Lighting Systems.
  9. Remove the quarter upper trim panel. Refer to Rear Quarter Upper Trim Panel Replacement .

    10. Object Number: 853427 Size: SH
  10. Lower the front seat back cushions in order to gain clearance to remove the headlining trim finish panel.
  11. Remove the 2 retainers (2) which secure the rear of the headlining trim finish panel.
  12. Lower the headlining trim finish panel (1). Remove the headlining through a rear door.

Installation Procedure

    Object Number: 853427 Size: SH
  1. Install the headlining trim finish panel (1) through a rear door.
  2. Install the headlining panel (1) to the roof panel. Secure the headlining panel with the rear 2 retainers (2).

    3. Object Number: 241992 Size: SH
  3. Install the quarter upper trim panel. Refer to Rear Quarter Upper Trim Panel Replacement .
  4. Install the dome lamp. Refer to Dome Lamp Replacement in Lighting Systems.
  5. Install the courtesy and reading lamp/sunroof switch assembly, if removed. Refer to Sunroof Switch Replacement in Roof.
  6. Install the sunshades and retainers. Refer to Sunshade Replacement .
  7. Install the windshield side garnish moldings (1) to the vehicle. Ensure that the plastic retainers are fully engaged.

    8. Object Number: 432007 Size: SH
  8. Install the assist handles. Refer to Assist Handle Replacement .
  9. Install the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement .
  10. Reposition the door opening frame garnish moldings (1, 2) on all doors to the correct position on the pinch well flange.
  11. Position the front seat back cushions back to the upright position.
  12. Enable the air bag system. Refer to SIR Disabling and Enabling in SIR.