GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - AWD 🢒 Body Systems 🢒 Lighting 🢒 Daytime Running Lights (DRL) Control Module Replacement

Removal Procedure

    Note: The DRL control module is located behind the instrument panel compartment.

  1. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement.

    2. Object Number: 2009643 Size: SH
  2. Disconnect the DRL control module electrical connector (2).
  3. Remove the screw (3) which secures the DRL mounting bracket to the instrument panel.
  4. Remove the DRL control module (1) with bracket from the instrument panel.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2009643 Size: SH
  1. Install the DRL control module (1) with the mounting bracket attached to the instrument panel. Secure the bracket with the screw (3) and tighten to 8.0 N·m (71 lb in).
  2. Connect the DRL control module electrical connector (2).
  3. Install the instrument panel compartment. Refer to Instrument Panel Compartment Replacement.