Mode Control Cable Replacement for Pontiac Vibe - AWD 2009

1. Remove the HVAC control assembly. Refer to Heater and Air Conditioning Control Replacement .




Important: Note the routing of the cable to make installation easier.

2. Using a taped flat-bladed tool, disengage the clip and disconnect the mode control cable from the HVAC module assembly .
3. Remove the mode control cable from the vehicle.

1. Position the mode control cable in the vehicle. Route the cable as previously noted.
2. Position the gear (1) of the mode control cable (2) and the unit link to the HVAC module assembly .
3. Install the HVAC control assembly. Refer to Heater and Air Conditioning Control Replacement .