GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Vibe - FWD 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Rear Brake Backing Plate Replacement

Removal Procedure
  1. Remove the wheel cylinder. Refer to Wheel Cylinder Replacement .
  2. Remove the bolt and the park brake cable from the backing plate.
  3. Remove the rear wheel bearing and hub assembly. Refer to Rear Wheel Bearing and Hub Replacement .

    4. Object Number: 819274 Size: SH
  4. Remove the backing plate (5).

Installation Procedure

    Object Number: 819274 Size: SH
  1. Install the backing plate (5) with the rear wheel bearing and hub assembly. Refer to Rear Wheel Bearing and Hub Replacement .

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the park brake cable and the bolt to the backing plate.

    3. Tighten
    Tighten the bolt to 7.8 N·m (69.04 lb in).

  3. Install the wheel cylinder. Refer to Wheel Cylinder Replacement .