GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Vibe - FWD 🢒 Suspension 🢒 Suspension General Diagnosis 🢒 Stabilizer Shaft Link Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front tire and wheel assembly from the vehicle. Refer to Tire and Wheel Removal and Installation .

    3. Object Number: 821347 Size: SH
  3. Use a 6 mm wrench in order to hold the stabilizer shaft link upper stud. Remove the nut from the stud in order to separate the link (3) from the strut bracket.
  4. Use a 6 mm wrench in order to hold the stabilizer shaft link lower stud. Remove the nut from the stud in order to separate the link from the stabilizer shaft.

Installation Procedure

    Object Number: 821347 Size: SH
  1. Use a 6 mm wrench in order to hold the stabilizer shaft link upper stud. Install the nut and the stud to the bracket (1) on the strut.

    2. Tighten
    Tighten the nut to 74 N·m (54.6 lb ft).

  2. Use a 6 mm wrench in order to hold the stabilizer shaft link lower stud. Install the nut and the stud to the stabilizer shaft.

    3. Tighten
    Tighten the nut to 74 N·m (54.6 lb ft).

  3. Install the front tire and wheel assembly to the vehicle. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle.