GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Vibe - FWD 🢒 Body 🢒 Doors 🢒 Door Lock Cylinder Replacement

Removal Procedure

    Object Number: 866289 Size: SH
  1. Remove the front side door water deflector. Refer to Front Side Door Water Deflector Replacement .
  2. Remove the hole plug (2).
  3. Remove the following components from the outside door handle (3):
    4. • The torx screw
    • The door lock cylinder (1)

Installation Procedure

    Object Number: 866289 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the door lock cylinder (1) to the outside door handle (3). Secure the lock cylinder with the torx screw.

    2. Tighten
    Tighten the door lock cylinder bolt to 4.0 N·m (35 lb in).

  2. Install the hole plug (2).
  3. Install the front side door water deflector. Refer to Front Side Door Water Deflector Replacement .