For 1990-2009 cars only
Removal Procedure
- Remove the screw (4) and trim cover (3) from the front side door trim panel (1).
- Remove the screw (2) that retains the front side door trim panel (1).
- Remove the front side door window regulator handle by using a cloth in order to pull off the snap ring, if equipped.
- Using a taped flat bladed tool, gently pry the front side door accessory switch mounting plate (1) from the front side door trim (2), if equipped.
- Disconnect the front side door window and/or lock switch electrical connectors (2, 3), if equipped.
- Remove the front side door accessory switch mounting plate (1) from the vehicle, if equipped.
- Remove the front side door inside handle. Refer to Front Side Door Inside Handle Replacement .
- Remove the front side door trim from the door by disengaging the 8 plastic retainers.
Installation Procedure
- Position and install the front side door trim to the door and press the plastic retainers into place. Ensure that the plastic retainers are completely engaged.
- Install the front side door inside handle. Refer to Front Side Door Inside Handle Replacement .
- Connect the front side door window and/or lock switch electrical connectors (2, 3), if equipped.
- Install the front side door accessory switch mounting plate (1) to the front side door trim, if equipped.
- Install the front side door window regulator handle snap ring (1) to the front side door window regulator handle (2), if equipped.
- Install the regulator handle (2) to the door, if equipped.
- Install the screw (2) that retains the front side door trim panel (1).
- Install the trim cover (3) and screw (4) to the front side door trim panel (1).
