GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Vibe - FWD 🢒 Body 🢒 Lighting Systems 🢒 Rear License Plate Lamp Replacement

Removal Procedure
  1. Open liftgate.
  2. Remove trim panel service hole cover. Refer to Liftgate Trim Panel Replacement .

    3. Object Number: 824519 Size: SH
  3. Disconnect the license lamp electrical connector.
  4. Remove the license plate lamp bulb, turning counterclockwise.
  5. Squeeze the tabs on each side of the license plate lamp (1).
  6. Remove the license plate lamp (1) from the liftgate (2).

Installation Procedure

    Object Number: 824519 Size: SH
  1. Install the license plate lamp (1) to the liftgate (2).
  2. Install the license plate lamp bulb, turning clockwise.
  3. Install the license plate lamp electrical connector.
  4. Install the trim panel service hole cover. Refer to Liftgate Trim Panel Replacement .
  5. Close liftgate.