GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Vibe - FWD 🢒 Body 🢒 Wiring Systems 🢒 Radio Replacement

Removal Procedure

    Object Number: 834108 Size: SH
  1. Remove the IP accessory center trim plate. Refer to Instrument Panel Center Trim Panel Replacement.
  2. Remove the 4 screws (1) which secure the radio (2).
  3. Disconnect the clamp (4) from the radio receiver bracket (3).

    4. Object Number: 240883 Size: SH
  4. Pull the radio (2) from the instrument panel.
  5. Disconnect the following from the radio:
    6. • The electrical connector
    • The antenna lead (1)

Installation Procedure

    Object Number: 240883 Size: SH
  1. Connect the radio electrical connector.
  2. Connect the antenna lead (1) to the radio (2).

    3. Object Number: 834108 Size: SH
  3. Install the radio (2) to the instrument panel. Secure the radio with the 4 screws (1).
  4. Install the IP accessory center trim plate. Refer to Instrument Panel Center Trim Panel Replacement.
  5. Refer to Control Module References for programming and setup information.