GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 293109  Size: SH
  1. Remove the wire harness cover from the lighted rearview mirror, if equipped.
  2. Use a small flat-bladed tool in order to remove the rearview mirror from the rearview mirror support.
  3. Disconnect the electrical connector from the lighted rearview mirror, if equipped.

Installation Procedure


    Object Number: 293109  Size: SH
  1. Connect the electrical connector to the lighted rearview mirror, if equipped.
  2. Install the rearview mirror into the rearview mirror support.
  3. Ensure that the mirror is fully seated.

  4. Install the wire harness cover to the lighted rearview mirror, if equipped.
  5. Refer to Control Module References for programming and setup information.