For 1990-2009 cars only
Removal Procedure
- Place the remote control door lock receiver transmitter face down on a clean surface.
- Insert a small screwdriver into the slot on the bottom of the transmitter.
- Carefully turn the screwdriver in the slot until the cover releases.
- Remove the cover while being careful not to damage the seal.
- Remove the battery from the transmitter.
Installation Procedure
- Install the new battery with the positive (+) side facing up.
- Inspect that the seal is properly positioned.
- Snap the two halves together.
- Verify that the remote control door lock receiver transmitter is functional. If not, refer to Transmitter Programming .
