Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Brake Warning System Schematics | |||
1 | Did you review the brake warning system circuit description and perform the necessary inspections? | Go to Step 2 | |
2 | With the ignition switch ON, observe the brake warning indicator and perform a brake warning system test by meeting each of the conditions described in the circuit description. Did the brake indicator illuminate and turn off for each condition? | Go to Testing for Electrical Intermittents in Wiring Systems | Go to Step 3 |
3 | Disconnect the brake fluid level switch connector. Did the brake indicator turn off? | Go to Step 4 | Go to Step 5 |
4 | Replace the brake fluid reservoir (which contains the fluid level switch). Refer to Master Cylinder Reservoir Replacement . Did you complete the repair? | Go to Step 11 | -- |
5 | Disconnect the DRL control module connector. Did the brake indicator turn off? | Go to Step 7 | Go to Step 6 |
6 | Repair the short to ground in the brake indicator control circuit. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you correct the condition? | Go to Step 11 | -- |
7 |
Did you find and correct the condition? | Go to Step 11 | Go to Step 8 |
8 | Test the park brake switch for a short to ground. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you find the condition? | Go to Step 9 | Go to Step 10 |
9 | Replace the park brake switch. Did you complete the repair? | Go to Step 11 | -- |
10 | Replace the DRL control module. Refer to Daytime Running Lights (DRL) Control Module Replacement in Lighting Systems. Did you complete the repair? | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
