GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Vibe - FWD 🢒 Transmission/Transaxle 🢒 Shift Lock Control 🢒 Park Lock Cable Replacement

Removal Procedure
  1. Remove the bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.
  2. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement in Steering Wheel and Column.
  3. Remove the instrument panel trim panel. Refer to Instrument Panel Center Trim Panel Replacement in Instrument Panel, Gages, and Console.
  4. Remove the front floor trim plate. Refer to Front Floor Console Trim Plate Replacement in Instrument Panel, Gages, and Console.
  5. Remove the front floor console cover. Refer to Front Floor Console Replacement in Instrument Panel, Gages, and Console.

    6. Object Number: 859215 Size: SH
  6. Disconnect the park lock cable from the shift lock lever.

    7. Object Number: 859218 Size: SH
  7. Disconnect the park lock cable from the shift lever plate.

    8. Object Number: 889848 Size: SH
  8. Disconnect the cable clamp.

    9. Object Number: 889851 Size: SH
  9. Turn the ignition switch to the ACC or Run position.
  10. Using a screwdriver, disconnect the cable from the upper bracket.
  11. Turn the ignition switch to the OFF position.

Installation Procedure
  1. Turn the ignition switch to the ACC or RUN position.

    2. Object Number: 889882 Size: SH
  2. Connect the cable to the upper bracket.

    3. Object Number: 889885 Size: SH
  3. Connect the cable clamp.
  4. Shift the manual selector to Neutral.

    5. Object Number: 889886 Size: SH
  5. Using a small screwdriver, unlock the lock tab on the cable adjustment assembly (1).

    6. Object Number: 889889 Size: SH
  6. Install the park lock cable through the hole of the shift lever plate, then press the retainer into the shift lever plate.

    7. Object Number: 859215 Size: SH
  7. Connect the park lock cable to the shift lock lever.
  8. Ensure that the ignition switch is in the ACC or RUN position and the manual lever is in the Neutral position.
  9. Press the lock tab on the cable adjustment assembly.
  10. Check park lock cable for proper operation.
  11. Install the front floor console cover. Refer to Front Floor Console Replacement in Instrument Panel, Gages, and Console.
  12. Install the front floor trim plate. Refer to Front Floor Console Trim Plate Replacement in Instrument Panel, Gages, and Console.
  13. Install the instrument panel trim panel. Refer to Instrument Panel Center Trim Panel Replacement in Instrument Panel, Gages, and Console.
  14. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement in Steering Wheel and Column.
  15. Install the bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.