For 1990-2009 cars only
Removal Procedure
- Disconnect the negative battery cable. Refer to Battery Replacement.
- Remove the center instrument trim panel. Refer to Instrument Panel Center Trim Panel Replacement.
- Remove the instrument compartment. Refer to Instrument Panel Compartment Replacement.
- Remove the front floor console. Refer to Front Floor Console Trim Plate Replacement.
- Push in the retaining clip, then disconnect the cable from the shifter assembly.
- Using a screwdriver, disconnect the park lock cable from the bracket.
- Disconnect the shift select cable from the manual selector lever.
- Using a screwdriver, disconnect the shift select cable from the shift lever plate.
- Disconnect the electrical connectors, then the wire harness clip.
- Remove the 4 nuts, then the manual selector from the vehicle.
Caution: Refer to Battery Disconnect Caution in the Preface section.
Installation Procedure
- Install the manual selector into the vehicle. Secure the manual selector with 4 nuts.
- Connect the manual selector electrical connectors.
- Install the shift select cable into the shift lever plate.
- Connect the shift select cable to the manual selector lever.
- Install the park lock cable to the shift lever plate.
- Connect the park lock cable to the manual selector lever.
- Install the center instrument trim panel. Refer to Instrument Panel Center Trim Panel Replacement.
- Install the instrument compartment. Refer to Instrument Panel Compartment Replacement.
- Install the front floor console. Refer to Front Floor Console Trim Plate Replacement.
- Connect the negative battery cable.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the manual selector bolts to 16 N·m (12 lb ft).
