For 1990-2009 cars only
- Disassemble the piston rings. Use a suitable tool in order to expand the rings. The piston rings must not be reused.
- Using a screwdriver, remove the piston snap rings.
- Heat the piston to 80-90°C (176-194°F).
- Lightly tap out the piston pin and remove the connecting rod.
- After removing the piston snap rings, remove the piston pin and remove the connecting rod.
Caution: Handle the piston carefully. Worn piston rings are sharp and may cause bodily injury.
| • | The piston and pin are a matched set. |
| • | Arrange the pistons, pins, rings, connecting rods and bearings in correct order. |
