Stabilizer Shaft Replacement FWD

1. Remove the 2 nuts (2, 6).
2. Remove the 2 bolts (3, 4).
3. Remove the stabilizer shaft (5).

1. Use the mark on the left rear side of the stabilizer shaft (5) in order to position the shaft on the rear axle (1).

Notice: Refer to Fastener Notice in the Preface section.

2. Install the 2 bolts (3, 4) and the 2 nuts (2, 6) in order to retain the shaft to the axle.

Tighten
Tighten the nuts and the bolts to 195 N·m (143.8 lb ft).