GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Place the front wheels in the straight ahead position.
  3. Remove the steering wheel from the steering column. Refer to Steering Wheel Replacement .

  4. Object Number: 820027  Size: SH
  5. Remove the 3 screws and the steering column lower trim cover (6) from the steering column.

  6. Object Number: 839654  Size: SH
  7. Disconnect the steering wheel module coil electrical connector (1).
  8. Disconnect the steering wheel position sensor electrical connector.

  9. Object Number: 820030  Size: SH
  10. Slide the steering column upper cover, release the 3 claws (2) and remove the steering wheel module coil (1).
  11. Remove the steering wheel position sensor from the steering wheel module coil.

Installation Procedure

  1. Ensure the front wheels are in the straight ahead position.
  2. Important: Make sure the turn signal switch is in the neutral position or turn signal switch pin may be damaged.

  3. Place the turn signal switch in the neutral position.
  4. Install the steering wheel position sensor to the steering wheel module coil.
  5. Important: When installing a new steering wheel module coil, remove the lock pin prior to installing the handle.


    Object Number: 820030  Size: SH
  6. Install the steering wheel module coil (1) and engage all 3 retaining claws (2).
  7. Center the steering wheel module coil, if necessary. Refer to Inflatable Restraint Steering Wheel Module Coil Centering .
  8. Connect the steering wheel position sensor electrical connector.

  9. Object Number: 839654  Size: SH
  10. Connect the steering wheel module coil electrical connector (1).

  11. Object Number: 820027  Size: SH
  12. Install the steering column lower trim cover (6). Secure with 3 screws.
  13. Install the steering wheel. Refer to Steering Wheel Replacement .
  14. Enable the SIR system. Refer to SIR Disabling and Enabling .