GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2008 🢒 Vibe - FWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Camshaft Position Actuator Solenoid Valve Replacement

Removal Procedure

    Object Number: 856569 Size: SH
  1. Remove the 2 fasteners.
  2. Remove the 2 plastic retainers.
  3. Remove the engine cover (1) from the engine.

    4. Object Number: 828858 Size: SH
  4. Disconnect the electrical connector (1) from the camshaft position (CMP) actuator solenoid valve (2).

    5. Object Number: 828860 Size: SH
  5. Remove the fastener retaining the CMP actuator solenoid valve (1) to the cylinder head.
  6. Remove the CMP actuator solenoid valve (1) and the O-ring (2) from the cylinder head.

Installation Procedure

    Object Number: 828860 Size: SH
  1. Install a new O-ring (2) and the CMP actuator solenoid valve (1) into the cylinder head.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Secure the CMP actuator solenoid valve with the fastener.

    3. Tighten
    Tighten the fastener to 9 N·m (80 lb in).


    Object Number: 828858 Size: SH
  3. Connect the electrical connector (1) to the solenoid valve (2).

    4. Object Number: 856569 Size: SH
  4. Install the engine cover (1).
  5. Secure the engine cover (1) with the 2 fasteners.

    6. Tighten
    Tighten the fasteners to 8.8 N·m (77 lb in).

  6. Install the 2 plastic retainers.