Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Exterior Lights Schematics | |||
1 | Did you review the Lighting System Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that the hazard lamps are always on. Does the system operate normally? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Remove the hazard switch Did the hazard lamps turn off? | Go to Step 4 | Go to Step 5 |
4 | Replace the hazard switch. Refer to Hazard Warning Switch Replacement . Is the replacement complete? | Go to Step 8 | -- |
5 | With the hazard switch and flasher relay removed. Check for continuity to ground between cavity 4 of the hazard switch and cavity 8 of the flasher relay. Refer to Circuit Testing . Is a ground present? | Go to Step 6 | Go to Step 7 |
6 | Repair short to ground between cavity 4 of the hazard switch and cavity 8 of the flasher relay. Refer to Wiring Repairs . Did you complete the repair? | Go to Step 8 | -- |
7 | Replace the flasher relay. Refer to Hazard and Turn Signal Flasher Replacement Did you complete the replacement? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
