GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2008 🢒 Vibe - FWD 🢒 Power and Signal Distribution 🢒 Power Outlets 🢒 115-Volt AC Instrument Panel Accessory Power Receptacle Replacement

Removal Procedure

    Object Number: 853104 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Using a flat-bladed tool, disengage the 3 upper clips (1) and the 2 lower clips (4) on the accessory power receptacle bezel (3).
  3. Disconnect the electrical connector.

    4. Object Number: 853276 Size: SH
  4. Disengage the 2 clips (1) on the accessory power receptacle (2).

    5. Object Number: 853104 Size: SH
  5. Remove the accessory power receptacle (2) from the bezel (3).

Installation Procedure

    Object Number: 853104 Size: SH
  1. Install the accessory power receptacle (2) to the bezel (3), by pushing in until the tabs lock in.
  2. Connect the electrical connector.
  3. Gently install the accessory power receptacle trim bezel (3) by pressing into place until the upper tabs (1) and lower tabs (4) are fully seated.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .