GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2008 🢒 Vibe - FWD 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Blower Motor Resistor Replacement

Removal Procedure
  1. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement .

    2. Object Number: 325437 Size: SH
  2. Disconnect the blower motor resistor electrical connector.
  3. Remove the 2 screws and the blower motor resistor (4) from the blower case.

Installation Procedure

    Object Number: 325437 Size: SH
  1. Install the blower motor resistor (4) to the blower case. Secure with the 2 screws.
  2. Connect the blower motor resistor electrical connector.
  3. Install the I/P compartment. Refer to Instrument Panel Compartment Replacement .