GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - FWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Instrument Cluster Replacement

Removal Procedure

    Note: The ignition switch must be in the OFF position when removing the instrument cluster assembly.

  1. Remove the IP cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement.

    2. Object Number: 2015056 Size: SH
  2. Remove the three screws.

    3. Object Number: 2015058 Size: SH
  3. Pull out the instrument cluster and disconnect the electrical connector.
  4. Remove the instrument cluster assembly.

Installation Procedure

    Object Number: 2015058 Size: SH
  1. Connect the electrical connector.
  2. Install the instrument cluster assembly.

    3. Object Number: 2015056 Size: SH
  3. Install the three screws.
  4. Install the IP cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement.