For 1990-2009 cars only
Removal Procedure
- Disable the SIR system. Refer to SIR Disabling and Enabling.
- Remove the upper instrument panel (I/P) pad. Refer to Instrument Panel Upper Trim Pad Replacement.
- Remove the I/P module fasteners (1).
- Disengage the 5 hooks and remove the inflatable restraint I/P module as shown.
- Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping.
Warning: Refer to SIR Inflator Module Handling and Storage Warning in the Preface section.
Installation Procedure
- Install the inflatable restraint I/P module (1) and engage the 5 hooks (2).
- Install the mounting fasteners (1) to the I/P module.
- Install the upper instrument panel (I/P) pad. Refer to Instrument Panel Upper Trim Pad Replacement.
- Enable the SIR system. Refer to SIR Disabling and Enabling.
Caution: Refer to Fastener Caution in the Preface section.
