GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - FWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Inflatable Restraint Front End Sensor Replacement

Removal Procedure

    Object Number: 1462772 Size: SH
  1. Disable the SIR system. Refer to SIR Disabling and Enabling.
  2. Remove the front fascia. Refer to Front Bumper Fascia Replacement.
  3. Remove the front end sensor electrical connector (1).
  4. Remove the front end sensor fastener (2).
  5. Remove the front end sensor.

Installation Procedure

    Object Number: 1462772 Size: SH
  1. Install the front end sensor.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the front end sensor - fastener (2).

    3. Tighten
    Tighten the fasteners to 9 N·m (80 lb in).

  3. Install the front end sensor electrical connector (1).
  4. Install the front fascia. Refer to Front Bumper Fascia Replacement.
  5. Enable the SIR system. Refer to SIR Disabling and Enabling.