GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - FWD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Body Side Rear Garnish Molding Replacement

Removal Procedure

    Object Number: 2015328 Size: SH
  1. Remove the rear seat back assembly. Refer to Rear Split Folding Seat Back Replacement.
  2. Remove the bolt (2).
  3. Remove the rear seat hinge (1).

    4. Object Number: 2015345 Size: SH
  4. Disengage the five clips.
  5. Disengage the retainer.
  6. Remove the body side rear garnish molding.

Installation Procedure

    Object Number: 2015345 Size: SH
  1. Install the body side rear garnish molding.
  2. Engage the retainer.
  3. Engage the five clips.

    4. Object Number: 2015328 Size: SH
  4. Install the rear seat hinge (1).

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the bolt (2) to the rear seat hinge (1) and tighten to 18 N·m (13 lb ft).
  6. Install the rear seat back assembly. Refer to Rear Split Folding Seat Back Replacement.