Upper Tie Bar Replacement for Pontiac Vibe - FWD 2009

1. Remove the two bolts (2).
2. Remove the two upper radiator supports (1).
3. Remove the hood primary latch. Refer to Hood Primary Latch Release Cable Replacement.



4. Separate the water by pass hose (2) from the two clamps (1).
5. Remove the horn. Refer to Horn Replacement.



6. Remove the bolt (1) from the hood lock support (2).



7. Remove the four bolts (1).
8. Remove the upper tie bar (2).

1. Install the upper tie bar (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the four bolts (1) and tighten to 5.5 N·m (49 lb in).



3. Install the bolt (1) to the hood lock support (2) and tighten to 7.0 N·m (62 lb in).
4. Install the horn. Refer to Horn Replacement.



5. Install the water by pass hose (2) to the two clamps (1).



6. Install the hood primary latch. Refer to Hood Primary Latch Release Cable Replacement.
7. Install the two upper radiator supports (1).
8. Install the two upper radiator support bolts (2) and tighten to to 19 N·m (14 lb ft).