GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - FWD 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Stop Lamp Switch Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 2009632 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the stop lamp switch electrical connector (1).

    3. Object Number: 2009635 Size: SH
  3. Turn the stop lamp switch (1) counter clockwise and remove the stop lamp switch assembly.

Installation Procedure

    Object Number: 2009636 Size: SH

    Note: When inserting the stop lamp switch assembly, support the pedal from behind so that the pedal is not pushed in.

  1. Install the stop lamp switch (1) until the rod hits the cushion.
  2. Make a quarter turn clockwise to install the stop lamp switch assembly.
  3. Adjust the stop lamp clearance. Refer to Stop Lamp Switch Adjustment.

    4. Object Number: 2009632 Size: SH
  4. Connect the stop lamp switch electrical connector (1).
  5. Connect the negative battery cable.