GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1245748  Size: SH
  1. Disconnect the negative battery cable.
  2. Notice: Refer to Vehicle Lifting and Jacking Notice in the Preface section.

  3. Raise and suitably support the vehicle.
  4. Disconnect the electrical connector from the front wheel speed sensor.
  5. Remove the bolt and the front wheel speed sensor from the steering knuckle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1245748  Size: SH
  1. Install the bolt and front wheel speed sensor to the steering knuckle.
  2. Tighten
    Tighten the bolt to 9 N·m (7 lb ft).

  3. Connect the electrical connector to the front wheel speed sensor.
  4. Lower the vehicle.
  5. Connect the negative battery cable.