Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Disconnect the engine control module (ECM) wiring harness connector.
- Remove the nuts from the ECM mounting bracket.
- Remove the ECM mounting bracket with the bolt
and the nut.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the ECM mounting bracket with the bolt and the nut.
Tighten
Tighten the ECM mounting bracket bolt and the nut to 12 N·m (9 lb ft).
- Install the ECM with the nuts.
Tighten
Tighten the ECM nut to 12 N·m (9 lb ft).