Engine Coolant Temperature Gage Replacement for Pontiac Wave 2005

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.
2. Remove the instrument cluster. Refer to Instrument Cluster Replacement .
3. Remove the instrument cluster lens and the face plate.
4. Remove the screws and the temperature gage from the cluster assembly.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the temperature gage to the cluster assembly with the screws.
2. Install the instrument cluster lens and the face plate.
3. Install the instrument cluster. Refer to Instrument Cluster Replacement .
4. Connect the negative battery cable.