GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Wave 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Camshaft Position Sensor Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1241533 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the sensor electrical connector.
  3. Remove the camshaft position (CMP) sensor bolts and sensor.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1241533 Size: SH
  1. Install the CMP sensor and bolts.

    2. Tighten
    Tighten the CMP bolts to 12 N·m (106 lb in).

  2. Connect the sensor electrical connector.
  3. Connect the negative battery cable.