GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 2049382  Size: SH

    Note: When removing the camshaft sprockets, the timing belt replacement procedure must be followed to ensure the camshafts and crankshaft are locked into position.

  1. Remove the timing belt. Refer to Timing Belt Replacement.
  2. Remove the camshaft exhaust sprocket bolt cap (4).
  3. Remove the camshaft exhaust sprocket bolt (3).
  4. Remove the camshaft exhaust sprocket with actuator (2).

Installation Procedure


    Object Number: 2049382  Size: SH
  1. Install the camshaft exhaust sprocket (2).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the camshaft exhaust sprocket bolt (3).
  4. Tighten
    Tighten the camshaft sprocket bolt to 65 N·m (47.9 lb ft).

  5. Install the camshaft exhaust sprocket bolt cap (4).
  6. Tighten
    Tighten the camshaft sprocket bolt cap to 50 N·m (36.8 lb ft).

  7. Install the timing belt. Refer to Timing Belt Replacement.