GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Wave HB 🢒 Engine 🢒 Engine Electrical 🢒 Voltage Regulator Replacement

Removal Procedure

    Object Number: 1887944 Size: SH
  1. Locate the four locking tabs on the generator cover.

    2. Object Number: 1887947 Size: SH
  2. Using a screwdriver (3), carefully pry the generator cover locking tabs (2) in four places and remove the generator cover (1).

    3. Object Number: 1887948 Size: SH

    Important: Screw (1) is slightly shorter then the other four screws (2).

  3. Remove the 5 screws (1 and 2) that retain the voltage regulator (3) and the rectifier (4) to the generator.

    4. Object Number: 1887950 Size: SH
  4. Carefully lift up the rectifier (2) and remove the voltage regulator (1).

Installation Procedure

    Object Number: 1887952 Size: SH
  1. Depress the voltage regulator (2) brushes and insert tube (1) into the opening to keep brushes in the depressed position.

    2. Object Number: 1887954 Size: SH
  2. Install the voltage regulator (1) on the generator and ensure the battery ring terminal (2) is positioned on the battery stud.
  3. Remove the brush tube (3).

    4. Object Number: 1887955 Size: SH

    Important: Screw (1) is slightly shorter then the remaining 4 screws (2) and must be installed in the position shown.

  4. Install the 5 screws (1 and 2) on the generator.

    5. Tighten
    Tighten the rectifier and voltage regulator retaining screws to 3 N·m (26 lb in).


    Object Number: 1887965 Size: SH
  5. Snap the generator cover (1) into place.