Inside Air Temperature Sensor Replacement for Pontiac Wave HB 2007

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.
2. Remove the instrument panel assembly. Refer to Instrument Panel Assembly Replacement
3. Disconnect the electrical connector.
4. Remove the retaining screws.
5. Remove the air inlet tube.
6. Remove the inside air temperature sensor.

1. Install the inside air temperature sensor with the retaining screws and tighten.
2. Install the air inlet tube and connect the electrical connector.
3. Install instrument panel assembly. Refer to Instrument Panel Assembly Replacement
4. Connect the negative battery cable.